Free reindeer SVG

Reindeer antlers SVG

Reindeer antlers, as a solid black shape — Reindeer antlers. The preview is the SVG file itself.

A matching pair of antlers with three tines each, as two loose pieces. Put them above a name, a monogram, a nose or a photo.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 72 mm (3.94 × 2.85 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	2 outlines
Cut length	453 mm at this size
Narrowest part	5.9 mm at this size
Nodes	114 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,467 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.72 in (25 × 18 mm)	1.5 mm	115 mm	130	Vinyl, card and thin sheet
2 × 1.45 in (51 × 37 mm)	3 mm	230 mm	35	Vinyl, card and thin sheet
3 × 2.17 in (76 × 55 mm)	4.5 mm	345 mm	15	Any material, including 3 mm wood and acrylic
4 × 2.89 in (102 × 73 mm)	6 mm	460 mm	6	Any material, including 3 mm wood and acrylic
6 × 4.34 in (152 × 110 mm)	9 mm	690 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.78 in (203 × 147 mm)	12 mm	920 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.68 in (305 × 220 mm)	18 mm	1,381 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More reindeer SVG files

← Peeking reindeer All 19 reindeer Tall reindeer antlers →