Free raccoon SVG

Raccoon face outline SVG

Raccoon face outline, drawn as a line — Raccoon face outline. The preview is the SVG file itself.

The raccoon face as a line drawing: the edge of the head, the brows with an eye under each, the muzzle, the inner ears and the stripe down the nose. For colouring pages, foil, engraving and pen plotters.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 84 mm (3.94 × 3.29 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	11: 1 outer edge and 10 cut-outs
Cut length	1,473 mm at this size
Narrowest part	2.1 mm at this size
Nodes	481 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,685 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.84 in (25 × 21 mm)	0.53 mm	374 mm	110	Fine detail: vinyl and paper only, weed with care
2 × 1.67 in (51 × 42 mm)	1.1 mm	748 mm	30	Vinyl, card and thin sheet
3 × 2.51 in (76 × 64 mm)	1.6 mm	1,122 mm	12	Vinyl, card and thin sheet
4 × 3.34 in (102 × 85 mm)	2.1 mm	1,497 mm	6	Vinyl, card and thin sheet
6 × 5.02 in (152 × 127 mm)	3.2 mm	2,245 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.69 in (203 × 170 mm)	4.3 mm	2,993 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.03 in (305 × 255 mm)	6.4 mm	4,490 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More raccoon SVG files

← Raccoon in a hollow tree All 12 raccoons Raccoon face →