Free raccoon SVG

Raccoon in a trash can SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Raccoon in a trash can, as a solid black shape
Raccoon in a trash can. The preview is the SVG file itself.

A raccoon looking out of a ribbed dustbin with the lid balanced on its head and a hand over the rim on each side. For anyone who calls them trash pandas. Exactly symmetrical.

What is in the file

Size68 × 100 mm (2.69 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut14: 1 outer edge and 13 cut-outs
Cut length935 mm at this size
Narrowest part1.7 mm at this size
Nodes281 curve and line segments
SymmetryMirror
Also found asTrash panda SVG

Measured from the file. PNG: 1,392 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.68 × 1 in (17 × 25 mm)0.43 mm237 mm130Too fine for most machines
1.37 × 2 in (35 × 51 mm)0.86 mm475 mm35Fine detail: vinyl and paper only, weed with care
2.05 × 3 in (52 × 76 mm)1.3 mm712 mm15Vinyl, card and thin sheet
2.74 × 4 in (69 × 102 mm)1.7 mm950 mm8Vinyl, card and thin sheet
4.1 × 6 in (104 × 152 mm)2.6 mm1,425 mm2Vinyl, card and thin sheet
5.47 × 8 in (139 × 203 mm)3.5 mm1,900 mm2Any material, including 3 mm wood and acrylic
8.21 × 12 in (208 × 305 mm)5.2 mm2,850 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More raccoon SVG files

← Raccoon hugging a heart All 12 raccoons Peeking raccoon →