Free raccoon SVG

Raccoon hugging a heart SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Raccoon hugging a heart, as a solid black shape
Raccoon hugging a heart. The preview is the SVG file itself.

A raccoon looking over the top of a big heart with a hand hooked over each side of it. The face has its mask, brows and muzzle cut in and the heart is left solid. Exactly symmetrical.

What is in the file

Size75 × 100 mm (2.95 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut11: 1 outer edge and 10 cut-outs
Cut length839 mm at this size
Narrowest part1.5 mm at this size
Nodes332 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,517 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.75 × 1 in (19 × 25 mm)0.38 mm213 mm120Too fine for most machines
1.5 × 2 in (38 × 51 mm)0.76 mm426 mm35Fine detail: vinyl and paper only, weed with care
2.25 × 3 in (57 × 76 mm)1.1 mm639 mm12Vinyl, card and thin sheet
3 × 4 in (76 × 102 mm)1.5 mm852 mm6Vinyl, card and thin sheet
4.49 × 6 in (114 × 152 mm)2.3 mm1,279 mm2Vinyl, card and thin sheet
5.99 × 8 in (152 × 203 mm)3 mm1,705 mm1Any material, including 3 mm wood and acrylic
8.99 × 12 in (228 × 305 mm)4.6 mm2,557 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More raccoon SVG files

← Baby raccoon sitting All 12 raccoons Raccoon in a trash can →