Free raccoon SVG

Raccoon face SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Raccoon face, as a solid black shape
Raccoon face. The preview is the SVG file itself.

A raccoon face from the front: round ears, cheek tufts and the black mask, which is left solid while the white brows and muzzle are cut away. A dark stripe runs down to the nose. Exactly symmetrical.

What is in the file

Size100 × 82 mm (3.94 × 3.24 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length776 mm at this size
Narrowest part2.5 mm at this size
Nodes185 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,662 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.82 in (25 × 21 mm)0.64 mm197 mm110Fine detail: vinyl and paper only, weed with care
2 × 1.65 in (51 × 42 mm)1.3 mm394 mm30Vinyl, card and thin sheet
3 × 2.47 in (76 × 63 mm)1.9 mm591 mm12Vinyl, card and thin sheet
4 × 3.3 in (102 × 84 mm)2.5 mm788 mm6Vinyl, card and thin sheet
6 × 4.94 in (152 × 126 mm)3.8 mm1,183 mm2Any material, including 3 mm wood and acrylic
8 × 6.59 in (203 × 167 mm)5.1 mm1,577 mm1Any material, including 3 mm wood and acrylic
12 × 9.89 in (305 × 251 mm)7.6 mm2,365 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More raccoon SVG files

← Raccoon face outline All 12 raccoons Raccoon silhouette walking →