Free raccoon SVG

Raccoon standing on its hind legs SVG

Raccoon standing on its hind legs, as a solid black shape — Raccoon standing on its hind legs. The preview is the SVG file itself.

A raccoon up on its back feet with both hands held out, the way one begs or reaches for a latch, with its ringed tail lying on the ground behind it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 81 mm (3.94 × 3.17 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	8: 1 outer edge and 7 cut-outs
Cut length	551 mm at this size
Narrowest part	2.3 mm at this size
Nodes	250 curve and line segments

Measured from the file. PNG: 2,000 × 1,627 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.81 in (25 × 20 mm)	0.58 mm	140 mm	120	Fine detail: vinyl and paper only, weed with care
2 × 1.61 in (51 × 41 mm)	1.2 mm	280 mm	30	Vinyl, card and thin sheet
3 × 2.42 in (76 × 61 mm)	1.8 mm	420 mm	12	Vinyl, card and thin sheet
4 × 3.22 in (102 × 82 mm)	2.3 mm	560 mm	6	Vinyl, card and thin sheet
6 × 4.84 in (152 × 123 mm)	3.5 mm	840 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.45 in (203 × 164 mm)	4.7 mm	1,120 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.67 in (305 × 246 mm)	7 mm	1,679 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More raccoon SVG files

← Raccoon silhouette walking All 12 raccoons Baby raccoon sitting →