Free raccoon SVG

Raccoon in a hollow tree SVG

Raccoon in a hollow tree, as a solid black shape
Raccoon in a hollow tree. The preview is the SVG file itself.

A length of tree trunk with a round hollow and a raccoon face looking out of it, its cheeks and chin welded to the edge of the hole. Lines of bark are cut into the wood above and below.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size73 × 100 mm (2.87 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut22: 1 outer edge and 21 cut-outs
Cut length1,097 mm at this size
Narrowest part3.5 mm at this size
Nodes236 curve and line segments

Measured from the file. PNG: 1,481 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.73 × 1 in (19 × 25 mm)0.89 mm279 mm130Fine detail: vinyl and paper only, weed with care
1.46 × 2 in (37 × 51 mm)1.8 mm557 mm35Vinyl, card and thin sheet
2.19 × 3 in (56 × 76 mm)2.7 mm836 mm15Vinyl, card and thin sheet
2.92 × 4 in (74 × 102 mm)3.6 mm1,115 mm6Any material, including 3 mm wood and acrylic
4.38 × 6 in (111 × 152 mm)5.3 mm1,672 mm2Any material, including 3 mm wood and acrylic
5.84 × 8 in (148 × 203 mm)7.1 mm2,229 mm2Any material, including 3 mm wood and acrylic
8.76 × 12 in (223 × 305 mm)11 mm3,344 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More raccoon SVG files

← Raccoon on a branch All 12 raccoons Raccoon face outline →