Free raccoon SVG

Raccoon silhouette walking SVG

Raccoon silhouette walking, as a solid black shape — Raccoon silhouette walking. The preview is the SVG file itself.

A raccoon on all fours in profile with its back humped, the mask marked by two slivers round the eye and four rings cut as windows in its tail. One piece.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 39 mm (3.94 × 1.52 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	8: 1 outer edge and 7 cut-outs
Cut length	458 mm at this size
Narrowest part	1.9 mm at this size
Nodes	220 curve and line segments

Measured from the file. PNG: 2,000 × 817 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.39 in (25 × 10 mm)	0.48 mm	116 mm	200	Too fine for most machines
2 × 0.77 in (51 × 20 mm)	0.97 mm	233 mm	60	Fine detail: vinyl and paper only, weed with care
3 × 1.15 in (76 × 29 mm)	1.4 mm	349 mm	27	Vinyl, card and thin sheet
4 × 1.54 in (102 × 39 mm)	1.9 mm	465 mm	14	Vinyl, card and thin sheet
6 × 2.31 in (152 × 59 mm)	2.9 mm	698 mm	4	Vinyl, card and thin sheet
8 × 3.08 in (203 × 78 mm)	3.9 mm	931 mm	3	Any material, including 3 mm wood and acrylic
12 × 4.62 in (305 × 117 mm)	5.8 mm	1,396 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More raccoon SVG files

← Raccoon face All 12 raccoons Raccoon standing on its hind legs →