Free raccoon SVG

Raccoon tail with rings SVG

Raccoon tail with rings, as a solid black shape — Raccoon tail with rings. The preview is the SVG file itself.

A bushy ringed tail on its own, hanging in a gentle curve from a loop and ending in a dark tip, with six rings cut as windows. For key rings, zip pulls and the back of a hat.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	32 × 100 mm (1.26 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	8: 1 outer edge and 7 cut-outs
Cut length	471 mm at this size
Narrowest part	2 mm at this size
Nodes	119 curve and line segments

Measured from the file. PNG: 690 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.32 × 1 in (8 × 25 mm)	0.51 mm	120 mm	230	Fine detail: vinyl and paper only, weed with care
0.64 × 2 in (16 × 51 mm)	1 mm	239 mm	70	Vinyl, card and thin sheet
0.96 × 3 in (24 × 76 mm)	1.5 mm	359 mm	30	Vinyl, card and thin sheet
1.28 × 4 in (32 × 102 mm)	2 mm	479 mm	16	Vinyl, card and thin sheet
1.91 × 6 in (49 × 152 mm)	3 mm	718 mm	5	Any material, including 3 mm wood and acrylic
2.55 × 8 in (65 × 203 mm)	4.1 mm	957 mm	4	Any material, including 3 mm wood and acrylic
3.83 × 12 in (97 × 305 mm)	6.1 mm	1,436 mm	3	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More raccoon SVG files

← Peeking raccoon All 12 raccoons Raccoon tracks, front and hind →