Free ornament SVG

Bauble with a snowflake cut-out SVG

Bauble with a snowflake cut-out, as a solid black shape
Bauble with a snowflake cut-out. The preview is the SVG file itself.

A round bauble with a six-armed snowflake cut through its middle. The arms are round-ended lines, so the hole weeds out in one pull.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size84 × 100 mm (3.29 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length833 mm at this size
Narrowest part3.2 mm at this size
Nodes157 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,683 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.84 × 1 in (21 × 25 mm)0.81 mm212 mm110Fine detail: vinyl and paper only, weed with care
1.67 × 2 in (42 × 51 mm)1.6 mm423 mm30Vinyl, card and thin sheet
2.51 × 3 in (64 × 76 mm)2.4 mm635 mm12Vinyl, card and thin sheet
3.34 × 4 in (85 × 102 mm)3.3 mm846 mm6Any material, including 3 mm wood and acrylic
5.01 × 6 in (127 × 152 mm)4.9 mm1,269 mm2Any material, including 3 mm wood and acrylic
6.68 × 8 in (170 × 203 mm)6.5 mm1,693 mm1Any material, including 3 mm wood and acrylic
10.02 × 12 in (255 × 305 mm)9.8 mm2,539 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ornament SVG files

← Finial ornament with a spike All 26 ornaments Onion ornament with a star cut-out →