Free ornament SVG

Monogram bauble frame SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Monogram bauble frame, as a solid black shape
Monogram bauble frame. The preview is the SVG file itself.

A bauble drawn as a wide ring with a scalloped inner edge, a cap and a loop. The open middle is about 60 mm across at 100 mm tall: room for an initial or a short name.

What is in the file

Size84 × 100 mm (3.29 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length630 mm at this size
Narrowest part2.4 mm at this size
Nodes129 curve and line segments
SymmetryMirror
Also found asOrnament monogram SVG

Measured from the file. PNG: 1,683 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.84 × 1 in (21 × 25 mm)0.61 mm160 mm110Fine detail: vinyl and paper only, weed with care
1.67 × 2 in (42 × 51 mm)1.2 mm320 mm30Vinyl, card and thin sheet
2.51 × 3 in (64 × 76 mm)1.8 mm480 mm12Vinyl, card and thin sheet
3.34 × 4 in (85 × 102 mm)2.4 mm640 mm6Vinyl, card and thin sheet
5.01 × 6 in (127 × 152 mm)3.7 mm960 mm2Any material, including 3 mm wood and acrylic
6.68 × 8 in (170 × 203 mm)4.9 mm1,280 mm1Any material, including 3 mm wood and acrylic
10.02 × 12 in (255 × 305 mm)7.3 mm1,920 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ornament SVG files

← Bauble with a bow All 26 ornaments Split bauble for a name →