Free ornament SVG

Split bauble for a name SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Split bauble for a name, as a solid black shape
Split bauble for a name. The preview is the SVG file itself.

A round bauble cut into two halves with a clear band between them for a name. Two loose pieces: space them apart and set your lettering in the gap.

What is in the file

Size80 × 100 mm (3.16 × 3.94 in), scales to any size
Pieces2 separate pieces
Outlines to cut3: 2 outer edges and 1 cut-out
Cut length428 mm at this size
Narrowest part2.4 mm at this size
Nodes29 curve and line segments
SymmetryMirror
Also found asSplit ornament SVG

Measured from the file. PNG: 1,619 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.8 × 1 in (20 × 25 mm)0.61 mm109 mm120Fine detail: vinyl and paper only, weed with care
1.6 × 2 in (41 × 51 mm)1.2 mm217 mm30Vinyl, card and thin sheet
2.41 × 3 in (61 × 76 mm)1.8 mm326 mm12Vinyl, card and thin sheet
3.21 × 4 in (81 × 102 mm)2.4 mm435 mm6Vinyl, card and thin sheet
4.81 × 6 in (122 × 152 mm)3.7 mm652 mm2Any material, including 3 mm wood and acrylic
6.42 × 8 in (163 × 203 mm)4.9 mm870 mm1Any material, including 3 mm wood and acrylic
9.62 × 12 in (244 × 305 mm)7.3 mm1,305 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ornament SVG files

← Monogram bauble frame All 26 ornaments Ring ornament with a hanging star →