Free ornament SVG

Round ornament blank with a hole SVG

Round ornament blank with a hole. The preview is the SVG file itself.

A plain disc with a hanging hole near the top edge. The blank to engrave, paint or cover in vinyl; the hole is 4.4 mm across at 100 mm.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	328 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	14 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 1 in (25 × 25 mm)	Over 1.5 mm	83 mm	100	Vinyl, card and thin sheet
2 × 2 in (51 × 51 mm)	Over 3 mm	167 mm	25	Any material, including 3 mm wood and acrylic
3 × 3 in (76 × 76 mm)	Over 4.6 mm	250 mm	9	Any material, including 3 mm wood and acrylic
4 × 4 in (102 × 102 mm)	Over 6.1 mm	333 mm	4	Any material, including 3 mm wood and acrylic
6 × 6 in (152 × 152 mm)	Over 9.1 mm	500 mm	1	Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)	Over 12 mm	666 mm	1	Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)	Over 18 mm	1,000 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ornament SVG files

← Three ornaments hanging from a rail All 26 ornaments Scalloped ornament blank →