Free ornament SVG

Arabesque tile ornament frame SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Arabesque tile ornament frame, drawn as a line
Arabesque tile ornament frame. The preview is the SVG file itself.

The arabesque outline as a band 5 mm wide with a loop at the top. Lay it over a tile as a border, or use it as a frame for a name.

What is in the file

Size77 × 100 mm (3.01 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length516 mm at this size
Narrowest part1.9 mm at this size
Nodes44 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,548 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.77 × 1 in (19 × 25 mm)0.48 mm131 mm120Too fine for most machines
1.53 × 2 in (39 × 51 mm)0.97 mm262 mm35Fine detail: vinyl and paper only, weed with care
2.3 × 3 in (58 × 76 mm)1.4 mm393 mm12Vinyl, card and thin sheet
3.06 × 4 in (78 × 102 mm)1.9 mm524 mm6Vinyl, card and thin sheet
4.59 × 6 in (117 × 152 mm)2.9 mm786 mm2Vinyl, card and thin sheet
6.12 × 8 in (155 × 203 mm)3.9 mm1,049 mm1Any material, including 3 mm wood and acrylic
9.18 × 12 in (233 × 305 mm)5.8 mm1,573 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ornament SVG files

← Arabesque ornament with a snowflake All 26 ornaments Heart ornament →