Free ornament SVG

Arabesque ornament with a snowflake SVG

Arabesque ornament with a snowflake, as a solid black shape — Arabesque ornament with a snowflake. The preview is the SVG file itself.

The arabesque tile shape with a large snowflake cut through the middle and a hanging hole above it.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	80 × 100 mm (3.15 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	3: 1 outer edge and 2 cut-outs
Cut length	812 mm at this size
Narrowest part	3 mm at this size
Nodes	150 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,615 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.8 × 1 in (20 × 25 mm)	0.76 mm	206 mm	120	Fine detail: vinyl and paper only, weed with care
1.6 × 2 in (41 × 51 mm)	1.5 mm	412 mm	30	Vinyl, card and thin sheet
2.4 × 3 in (61 × 76 mm)	2.3 mm	619 mm	12	Vinyl, card and thin sheet
3.2 × 4 in (81 × 102 mm)	3 mm	825 mm	6	Any material, including 3 mm wood and acrylic
4.8 × 6 in (122 × 152 mm)	4.6 mm	1,237 mm	2	Any material, including 3 mm wood and acrylic
6.4 × 8 in (163 × 203 mm)	6.1 mm	1,650 mm	1	Any material, including 3 mm wood and acrylic
9.6 × 12 in (244 × 305 mm)	9.1 mm	2,475 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ornament SVG files

← Arabesque tile ornament blank All 26 ornaments Arabesque tile ornament frame →