Free ornament SVG

Finial ornament with a spike SVG

Finial ornament with a spike, as a solid black shape
Finial ornament with a spike. The preview is the SVG file itself.

A ball, a waist, a bead and a long tapering spike, in the shape of a glass finial ornament. Tall and slim, so it suits bookmarks and the side of a card.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size49 × 100 mm (1.93 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length272 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes51 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,021 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.49 × 1 in (12 × 25 mm)Over 1.5 mm69 mm170Vinyl, card and thin sheet
0.98 × 2 in (25 × 51 mm)Over 3 mm138 mm50Any material, including 3 mm wood and acrylic
1.47 × 3 in (37 × 76 mm)Over 4.6 mm207 mm21Any material, including 3 mm wood and acrylic
1.96 × 4 in (50 × 102 mm)Over 6.1 mm276 mm10Any material, including 3 mm wood and acrylic
2.95 × 6 in (75 × 152 mm)Over 9.1 mm415 mm3Any material, including 3 mm wood and acrylic
3.93 × 8 in (100 × 203 mm)Over 12 mm553 mm2Any material, including 3 mm wood and acrylic
5.89 × 12 in (150 × 305 mm)Over 18 mm829 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ornament SVG files

← Teardrop ornament All 26 ornaments Bauble with a snowflake cut-out →