Free ornament SVG

Nordic band ornament SVG

Nordic band ornament, as a solid black shape
Nordic band ornament. The preview is the SVG file itself.

A row of seven diamonds across the middle, a thin line above and below, and dots at the top and bottom: a knitted-jumper pattern cut from a round bauble.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size84 × 100 mm (3.29 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut21: 1 outer edge and 20 cut-outs
Cut length941 mm at this size
Narrowest part3.5 mm at this size
Nodes105 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,683 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.84 × 1 in (21 × 25 mm)0.89 mm239 mm110Fine detail: vinyl and paper only, weed with care
1.67 × 2 in (42 × 51 mm)1.8 mm478 mm30Vinyl, card and thin sheet
2.51 × 3 in (64 × 76 mm)2.7 mm717 mm12Vinyl, card and thin sheet
3.34 × 4 in (85 × 102 mm)3.6 mm956 mm6Any material, including 3 mm wood and acrylic
5.01 × 6 in (127 × 152 mm)5.3 mm1,434 mm2Any material, including 3 mm wood and acrylic
6.68 × 8 in (170 × 203 mm)7.1 mm1,912 mm1Any material, including 3 mm wood and acrylic
10.02 × 12 in (255 × 305 mm)11 mm2,868 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ornament SVG files

← Ribbed glass bauble All 26 ornaments Bauble with a Christmas tree cut-out →