Free ornament SVG

Onion ornament outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Onion ornament outline, drawn as a line
Onion ornament outline. The preview is the SVG file itself.

The pointed onion bauble as a single even line, cap and loop included. Pair it with the round outline for a row of line-drawn ornaments.

What is in the file

Size70 × 100 mm (2.75 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length511 mm at this size
Narrowest part2 mm at this size
Nodes59 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,421 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.7 × 1 in (18 × 25 mm)0.51 mm130 mm130Fine detail: vinyl and paper only, weed with care
1.4 × 2 in (36 × 51 mm)1 mm260 mm35Vinyl, card and thin sheet
2.1 × 3 in (53 × 76 mm)1.5 mm389 mm15Vinyl, card and thin sheet
2.8 × 4 in (71 × 102 mm)2 mm519 mm8Vinyl, card and thin sheet
4.19 × 6 in (107 × 152 mm)3 mm779 mm2Any material, including 3 mm wood and acrylic
5.59 × 8 in (142 × 203 mm)4.1 mm1,038 mm2Any material, including 3 mm wood and acrylic
8.39 × 12 in (213 × 305 mm)6.1 mm1,558 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ornament SVG files

← Round ornament outline All 26 ornaments Finial ornament outline →