Free ornament SVG

Arabesque tile ornament blank SVG

Arabesque tile ornament blank. The preview is the SVG file itself.

The arabesque or lantern tile shape, with an ogee point at the top and bottom and a round lobe at each side, and a hanging hole. Cut it from wood or use it to size vinyl for a ceramic tile.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	80 × 100 mm (3.15 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	304 mm at this size
Narrowest part	3.9 mm at this size
Nodes	18 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,615 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.8 × 1 in (20 × 25 mm)	0.99 mm	77 mm	120	Fine detail: vinyl and paper only, weed with care
1.6 × 2 in (41 × 51 mm)	2 mm	154 mm	30	Vinyl, card and thin sheet
2.4 × 3 in (61 × 76 mm)	3 mm	232 mm	12	Vinyl, card and thin sheet
3.2 × 4 in (81 × 102 mm)	4 mm	309 mm	6	Any material, including 3 mm wood and acrylic
4.8 × 6 in (122 × 152 mm)	5.9 mm	463 mm	2	Any material, including 3 mm wood and acrylic
6.4 × 8 in (163 × 203 mm)	7.9 mm	618 mm	1	Any material, including 3 mm wood and acrylic
9.6 × 12 in (244 × 305 mm)	12 mm	927 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ornament SVG files

← Scalloped ornament blank All 26 ornaments Arabesque ornament with a snowflake →