Free ornament SVG

Round bauble ornament SVG

Round bauble ornament, as a solid black shape
Round bauble ornament. The preview is the SVG file itself.

A plain round bauble with a cap and a hanging loop, welded into one piece. The starting point for names, monograms and your own cut-outs.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size84 × 100 mm (3.29 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length315 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes25 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,683 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.84 × 1 in (21 × 25 mm)Over 1.5 mm80 mm110Vinyl, card and thin sheet
1.67 × 2 in (42 × 51 mm)Over 3 mm160 mm30Any material, including 3 mm wood and acrylic
2.51 × 3 in (64 × 76 mm)Over 4.6 mm240 mm12Any material, including 3 mm wood and acrylic
3.34 × 4 in (85 × 102 mm)Over 6.1 mm320 mm6Any material, including 3 mm wood and acrylic
5.01 × 6 in (127 × 152 mm)Over 9.1 mm480 mm2Any material, including 3 mm wood and acrylic
6.68 × 8 in (170 × 203 mm)Over 12 mm640 mm1Any material, including 3 mm wood and acrylic
10.02 × 12 in (255 × 305 mm)Over 18 mm960 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ornament SVG files

← Star-shaped ornament All 26 ornaments Onion-shaped ornament →