Free ornament SVG

Onion ornament with a star cut-out SVG

Onion ornament with a star cut-out. The preview is the SVG file itself.

A pointed onion bauble with one large five-pointed star cut from its widest part. Back it with gold card, or leave it open so the tree lights show through.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	70 × 100 mm (2.75 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	3: 1 outer edge and 2 cut-outs
Cut length	411 mm at this size
Narrowest part	2 mm at this size
Nodes	40 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,421 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.7 × 1 in (18 × 25 mm)	0.51 mm	104 mm	130	Fine detail: vinyl and paper only, weed with care
1.4 × 2 in (36 × 51 mm)	1 mm	209 mm	35	Vinyl, card and thin sheet
2.1 × 3 in (53 × 76 mm)	1.5 mm	313 mm	15	Vinyl, card and thin sheet
2.8 × 4 in (71 × 102 mm)	2 mm	418 mm	8	Vinyl, card and thin sheet
4.19 × 6 in (107 × 152 mm)	3 mm	626 mm	2	Any material, including 3 mm wood and acrylic
5.59 × 8 in (142 × 203 mm)	4.1 mm	835 mm	2	Any material, including 3 mm wood and acrylic
8.39 × 12 in (213 × 305 mm)	6.1 mm	1,253 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ornament SVG files

← Bauble with a snowflake cut-out All 26 ornaments Striped bauble ornament →