Free ornament SVG

Bauble with a Christmas tree cut-out SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Bauble with a Christmas tree cut-out, as a solid black shape
Bauble with a Christmas tree cut-out. The preview is the SVG file itself.

A round bauble with a small three-tier tree cut from its centre. Straight edges only inside, so the tree weeds out cleanly.

What is in the file

Size84 × 100 mm (3.29 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length500 mm at this size
Narrowest part2.4 mm at this size
Nodes40 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,683 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.84 × 1 in (21 × 25 mm)0.61 mm127 mm110Fine detail: vinyl and paper only, weed with care
1.67 × 2 in (42 × 51 mm)1.2 mm254 mm30Vinyl, card and thin sheet
2.51 × 3 in (64 × 76 mm)1.8 mm381 mm12Vinyl, card and thin sheet
3.34 × 4 in (85 × 102 mm)2.4 mm508 mm6Vinyl, card and thin sheet
5.01 × 6 in (127 × 152 mm)3.7 mm762 mm2Any material, including 3 mm wood and acrylic
6.68 × 8 in (170 × 203 mm)4.9 mm1,016 mm1Any material, including 3 mm wood and acrylic
10.02 × 12 in (255 × 305 mm)7.3 mm1,524 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ornament SVG files

← Nordic band ornament All 26 ornaments Bauble with a bow →