Free ornament SVG

Bauble with a bow SVG

Bauble with a bow, as a solid black shape — Bauble with a bow. The preview is the SVG file itself.

A round bauble with a bow tied at its cap: two loops that stand clear of the ball, and two notched tails that lie over it with a thin gap round them.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	80 × 100 mm (3.13 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	6: 1 outer edge and 5 cut-outs
Cut length	689 mm at this size
Narrowest part	2.8 mm at this size
Nodes	76 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,606 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.8 × 1 in (20 × 25 mm)	0.71 mm	175 mm	120	Fine detail: vinyl and paper only, weed with care
1.59 × 2 in (40 × 51 mm)	1.4 mm	350 mm	30	Vinyl, card and thin sheet
2.38 × 3 in (61 × 76 mm)	2.1 mm	525 mm	12	Vinyl, card and thin sheet
3.18 × 4 in (81 × 102 mm)	2.8 mm	700 mm	6	Vinyl, card and thin sheet
4.77 × 6 in (121 × 152 mm)	4.3 mm	1,050 mm	2	Any material, including 3 mm wood and acrylic
6.36 × 8 in (162 × 203 mm)	5.7 mm	1,400 mm	1	Any material, including 3 mm wood and acrylic
9.54 × 12 in (242 × 305 mm)	8.5 mm	2,100 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ornament SVG files

← Bauble with a Christmas tree cut-out All 26 ornaments Monogram bauble frame →