Free ornament SVG

Finial ornament outline SVG

Finial ornament outline, drawn as a line
Finial ornament outline. The preview is the SVG file itself.

The spiked finial as a hollow line drawing that closes to a solid spike at the bottom. Its long shape fills the edge of a card or a tall tag.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size49 × 100 mm (1.93 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length477 mm at this size
Narrowest part1.9 mm at this size
Nodes99 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,021 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.49 × 1 in (12 × 25 mm)0.48 mm121 mm170Too fine for most machines
0.98 × 2 in (25 × 51 mm)0.97 mm242 mm50Fine detail: vinyl and paper only, weed with care
1.47 × 3 in (37 × 76 mm)1.4 mm363 mm21Vinyl, card and thin sheet
1.96 × 4 in (50 × 102 mm)1.9 mm485 mm10Vinyl, card and thin sheet
2.95 × 6 in (75 × 152 mm)2.9 mm727 mm3Vinyl, card and thin sheet
3.93 × 8 in (100 × 203 mm)3.9 mm969 mm2Any material, including 3 mm wood and acrylic
5.89 × 12 in (150 × 305 mm)5.8 mm1,454 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ornament SVG files

← Onion ornament outline All 26 ornaments Geometric diamond ornament →