Free ornament SVG

Onion-shaped ornament SVG

Onion-shaped ornament, as a solid black shape
Onion-shaped ornament. The preview is the SVG file itself.

A bauble with round shoulders that draws down to a point, like a blown-glass onion ornament, with a cap and loop.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size70 × 100 mm (2.75 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length283 mm at this size
Narrowest part2 mm at this size
Nodes30 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,421 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.7 × 1 in (18 × 25 mm)0.51 mm72 mm130Fine detail: vinyl and paper only, weed with care
1.4 × 2 in (36 × 51 mm)1 mm144 mm35Vinyl, card and thin sheet
2.1 × 3 in (53 × 76 mm)1.5 mm216 mm15Vinyl, card and thin sheet
2.8 × 4 in (71 × 102 mm)2 mm288 mm8Vinyl, card and thin sheet
4.19 × 6 in (107 × 152 mm)3 mm431 mm2Any material, including 3 mm wood and acrylic
5.59 × 8 in (142 × 203 mm)4.1 mm575 mm2Any material, including 3 mm wood and acrylic
8.39 × 12 in (213 × 305 mm)6.1 mm863 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ornament SVG files

← Round bauble ornament All 26 ornaments Teardrop ornament →