Square map marker with a location pin point SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A rounded square with a pointer under it and a round hole in the middle: the squarer kind of map marker. It holds a picture or a number better than a round head.
What is in the file
| Size | 64 × 100 mm (2.51 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 365 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 30 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 1,302 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.64 × 1 in (16 × 25 mm) | Over 1.5 mm | 93 mm | 140 | Vinyl, card and thin sheet |
| 1.27 × 2 in (32 × 51 mm) | Over 3 mm | 185 mm | 40 | Any material, including 3 mm wood and acrylic |
| 1.91 × 3 in (49 × 76 mm) | Over 4.6 mm | 278 mm | 15 | Any material, including 3 mm wood and acrylic |
| 2.55 × 4 in (65 × 102 mm) | Over 6.1 mm | 371 mm | 8 | Any material, including 3 mm wood and acrylic |
| 3.82 × 6 in (97 × 152 mm) | Over 9.1 mm | 556 mm | 3 | Any material, including 3 mm wood and acrylic |
| 5.1 × 8 in (129 × 203 mm) | Over 12 mm | 742 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.64 × 12 in (194 × 305 mm) | Over 18 mm | 1,113 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More location pin SVG files
-
Location pin frame for an initial Solid · one piece -
Two location pins with a heart and a star Solid · one piece -
Home location pin Solid · one piece -
Heart-shaped location pin Solid · one piece -
Push pin for a location on a map Solid · one piece -
Location pin on a folded map Solid · one piece -
Location pin route from start to finish Solid · one piece -
Location pin target sign Solid · 2 pieces
← Location pin on its shadow All 14 location pins Location pin frame for an initial →