Location pin frame for an initial SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The pin with its whole head opened into a ring about 8 mm wide. The opening is 45 mm across at full size: put an initial, a date or a small photograph in it.
What is in the file
| Size | 62 × 100 mm (2.44 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 392 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 16 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 1,269 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.62 × 1 in (16 × 25 mm) | Over 1.5 mm | 100 mm | 140 | Vinyl, card and thin sheet |
| 1.24 × 2 in (31 × 51 mm) | Over 3 mm | 199 mm | 40 | Any material, including 3 mm wood and acrylic |
| 1.86 × 3 in (47 × 76 mm) | Over 4.6 mm | 299 mm | 15 | Any material, including 3 mm wood and acrylic |
| 2.48 × 4 in (63 × 102 mm) | Over 6.1 mm | 398 mm | 8 | Any material, including 3 mm wood and acrylic |
| 3.72 × 6 in (94 × 152 mm) | Over 9.1 mm | 597 mm | 3 | Any material, including 3 mm wood and acrylic |
| 4.96 × 8 in (126 × 203 mm) | Over 12 mm | 797 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.44 × 12 in (189 × 305 mm) | Over 18 mm | 1,195 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More location pin SVG files
-
Two location pins with a heart and a star Solid · one piece -
Home location pin Solid · one piece -
Heart-shaped location pin Solid · one piece -
Push pin for a location on a map Solid · one piece -
Location pin on a folded map Solid · one piece -
Location pin route from start to finish Solid · one piece -
Location pin target sign Solid · 2 pieces -
Layered location pin in three colours Layered · 3 pieces
← Square map marker with a location pin point All 14 location pins Two location pins with a heart and a star →