Location pin route from start to finish SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Two pins joined by a winding line: a small one where the journey starts and a larger one where it ends. The line is welded to both points, so the route is one piece.
What is in the file
| Size | 100 × 99 mm (3.94 × 3.88 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 3: 1 outer edge and 2 cut-outs |
| Cut length | 594 mm at this size |
| Narrowest part | 1.8 mm at this size |
| Nodes | 67 curve and line segments |
| Also found as | Gps SVG |
Measured from the file. PNG: 2,000 × 1,973 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.99 in (25 × 25 mm) | 0.46 mm | 151 mm | 100 | Too fine for most machines |
| 2 × 1.97 in (51 × 50 mm) | 0.91 mm | 302 mm | 25 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.96 in (76 × 75 mm) | 1.4 mm | 453 mm | 9 | Vinyl, card and thin sheet |
| 4 × 3.94 in (102 × 100 mm) | 1.8 mm | 604 mm | 4 | Vinyl, card and thin sheet |
| 6 × 5.92 in (152 × 150 mm) | 2.7 mm | 905 mm | 1 | Vinyl, card and thin sheet |
| 8 × 7.89 in (203 × 200 mm) | 3.7 mm | 1,207 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.83 in (305 × 301 mm) | 5.5 mm | 1,811 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More location pin SVG files
-
Location pin target sign Solid · 2 pieces -
Layered location pin in three colours Layered · 3 pieces -
Classic location pin Solid · one piece -
Solid location pin Solid · one piece -
Location pin outline Outline · 2 pieces -
Location pin on its shadow Solid · one piece -
Square map marker with a location pin point Solid · one piece -
Location pin frame for an initial Solid · one piece
← Location pin on a folded map All 14 location pins Location pin target sign →