Location pin target sign SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The find-me sign from a map screen: a ring with a tick at each quarter, and a loose dot in the middle. Two pieces. Use the dot or leave it out.
What is in the file
| Size | 100 × 100 mm (3.94 × 3.94 in), scales to any size |
|---|---|
| Pieces | 2 separate pieces |
| Outlines to cut | 3: 2 outer edges and 1 cut-out |
| Cut length | 576 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 42 curve and line segments |
| Symmetry | 4-fold rotation and mirror |
| Also found as | Location marker SVG |
Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 1 in (25 × 25 mm) | Over 1.5 mm | 146 mm | 100 | Vinyl, card and thin sheet |
| 2 × 2 in (51 × 51 mm) | Over 3 mm | 293 mm | 25 | Any material, including 3 mm wood and acrylic |
| 3 × 3 in (76 × 76 mm) | Over 4.6 mm | 439 mm | 9 | Any material, including 3 mm wood and acrylic |
| 4 × 4 in (102 × 102 mm) | Over 6.1 mm | 585 mm | 4 | Any material, including 3 mm wood and acrylic |
| 6 × 6 in (152 × 152 mm) | Over 9.1 mm | 878 mm | 1 | Any material, including 3 mm wood and acrylic |
| 8 × 8 in (203 × 203 mm) | Over 12 mm | 1,170 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 12 in (305 × 305 mm) | Over 18 mm | 1,756 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More location pin SVG files
-
Layered location pin in three colours Layered · 3 pieces -
Classic location pin Solid · one piece -
Solid location pin Solid · one piece -
Location pin outline Outline · 2 pieces -
Location pin on its shadow Solid · one piece -
Square map marker with a location pin point Solid · one piece -
Location pin frame for an initial Solid · one piece -
Two location pins with a heart and a star Solid · one piece
← Location pin route from start to finish All 14 location pins Layered location pin in three colours →