Two location pins with a heart and a star SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Two pins sharing one point and leaning apart: one with a heart cut out of its head and one with a five-pointed star, welded by a small oval shadow at the point. For the place you met and the place you love, or his and hers on a wedding map.
What is in the file
| Size | 100 × 62 mm (3.94 × 2.43 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 3: 1 outer edge and 2 cut-outs |
| Cut length | 501 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 61 curve and line segments |
Measured from the file. PNG: 2,000 × 1,263 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.62 in (25 × 16 mm) | Over 1.5 mm | 127 mm | 140 | Vinyl, card and thin sheet |
| 2 × 1.23 in (51 × 31 mm) | Over 3 mm | 255 mm | 40 | Any material, including 3 mm wood and acrylic |
| 3 × 1.85 in (76 × 47 mm) | Over 4.6 mm | 382 mm | 15 | Any material, including 3 mm wood and acrylic |
| 4 × 2.47 in (102 × 63 mm) | Over 6.1 mm | 509 mm | 8 | Any material, including 3 mm wood and acrylic |
| 6 × 3.7 in (152 × 94 mm) | Over 9.1 mm | 764 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.94 in (203 × 125 mm) | Over 12 mm | 1,018 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.4 in (305 × 188 mm) | Over 18 mm | 1,527 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More location pin SVG files
-
Home location pin Solid · one piece -
Heart-shaped location pin Solid · one piece -
Push pin for a location on a map Solid · one piece -
Location pin on a folded map Solid · one piece -
Location pin route from start to finish Solid · one piece -
Location pin target sign Solid · 2 pieces -
Layered location pin in three colours Layered · 3 pieces -
Classic location pin Solid · one piece
← Location pin frame for an initial All 14 location pins Home location pin →