Free location pin SVG

Push pin for a location on a map SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Push pin for a location on a map, as a solid black shape
Push pin for a location on a map. The preview is the SVG file itself.

A push pin leaning to one side: a flat cap, a waisted grip with a glint, a collar and a long steel point. The kind you press into a paper map on a cork board.

What is in the file

Size65 × 100 mm (2.55 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length348 mm at this size
Narrowest part3.8 mm at this size
Nodes40 curve and line segments

Measured from the file. PNG: 1,321 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.65 × 1 in (16 × 25 mm)0.97 mm88 mm140Fine detail: vinyl and paper only, weed with care
1.29 × 2 in (33 × 51 mm)1.9 mm177 mm40Vinyl, card and thin sheet
1.94 × 3 in (49 × 76 mm)2.9 mm265 mm15Vinyl, card and thin sheet
2.59 × 4 in (66 × 102 mm)3.9 mm354 mm8Any material, including 3 mm wood and acrylic
3.88 × 6 in (99 × 152 mm)5.8 mm530 mm2Any material, including 3 mm wood and acrylic
5.18 × 8 in (131 × 203 mm)7.7 mm707 mm2Any material, including 3 mm wood and acrylic
7.76 × 12 in (197 × 305 mm)12 mm1,061 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More location pin SVG files

← Heart-shaped location pin All 14 location pins Location pin on a folded map →