Heart-shaped location pin SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A pin whose head is a heart: two round lobes and two straight sides that run down to a long point, with a small round hole. One piece. For a love-where-you-live print or a honeymoon scrapbook.
What is in the file
| Size | 71 × 100 mm (2.8 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 329 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 16 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 1,446 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.71 × 1 in (18 × 25 mm) | Over 1.5 mm | 84 mm | 130 | Vinyl, card and thin sheet |
| 1.42 × 2 in (36 × 51 mm) | Over 3 mm | 167 mm | 35 | Any material, including 3 mm wood and acrylic |
| 2.14 × 3 in (54 × 76 mm) | Over 4.6 mm | 251 mm | 15 | Any material, including 3 mm wood and acrylic |
| 2.85 × 4 in (72 × 102 mm) | Over 6.1 mm | 334 mm | 8 | Any material, including 3 mm wood and acrylic |
| 4.27 × 6 in (109 × 152 mm) | Over 9.1 mm | 501 mm | 2 | Any material, including 3 mm wood and acrylic |
| 5.7 × 8 in (145 × 203 mm) | Over 12 mm | 669 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8.54 × 12 in (217 × 305 mm) | Over 18 mm | 1,003 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More location pin SVG files
-
Push pin for a location on a map Solid · one piece -
Location pin on a folded map Solid · one piece -
Location pin route from start to finish Solid · one piece -
Location pin target sign Solid · 2 pieces -
Layered location pin in three colours Layered · 3 pieces -
Classic location pin Solid · one piece -
Solid location pin Solid · one piece -
Location pin outline Outline · 2 pieces
← Home location pin All 14 location pins Push pin for a location on a map →