Home location pin SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A pin whose head is a house: a pitched roof with a chimney and walls that run in to the point, with a round hole. For a new address card, a change-of-address stamp or a key hook sign.
What is in the file
| Size | 68 × 100 mm (2.66 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 346 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 32 curve and line segments |
| Also found as | Home pin icon SVG |
Measured from the file. PNG: 1,375 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.68 × 1 in (17 × 25 mm) | Over 1.5 mm | 88 mm | 130 | Vinyl, card and thin sheet |
| 1.35 × 2 in (34 × 51 mm) | Over 3 mm | 176 mm | 35 | Any material, including 3 mm wood and acrylic |
| 2.03 × 3 in (51 × 76 mm) | Over 4.6 mm | 264 mm | 15 | Any material, including 3 mm wood and acrylic |
| 2.7 × 4 in (69 × 102 mm) | Over 6.1 mm | 352 mm | 8 | Any material, including 3 mm wood and acrylic |
| 4.05 × 6 in (103 × 152 mm) | Over 9.1 mm | 527 mm | 2 | Any material, including 3 mm wood and acrylic |
| 5.4 × 8 in (137 × 203 mm) | Over 12 mm | 703 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8.1 × 12 in (206 × 305 mm) | Over 18 mm | 1,055 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More location pin SVG files
-
Heart-shaped location pin Solid · one piece -
Push pin for a location on a map Solid · one piece -
Location pin on a folded map Solid · one piece -
Location pin route from start to finish Solid · one piece -
Location pin target sign Solid · 2 pieces -
Layered location pin in three colours Layered · 3 pieces -
Classic location pin Solid · one piece -
Solid location pin Solid · one piece
← Two location pins with a heart and a star All 14 location pins Heart-shaped location pin →