Free llama SVG

Llama with a scarf SVG

Llama with a scarf, as a solid black shape — Llama with a scarf. The preview is the SVG file itself.

The llama wrapped up for winter: a striped scarf round its neck with one end hanging down. One piece; cut the scarf again in a bright colour to layer it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	43 × 100 mm (1.68 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	14: 1 outer edge and 13 cut-outs
Cut length	763 mm at this size
Narrowest part	1.4 mm at this size
Nodes	249 curve and line segments

Measured from the file. PNG: 896 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.43 × 1 in (11 × 25 mm)	0.36 mm	194 mm	190	Too fine for most machines
0.85 × 2 in (22 × 51 mm)	0.71 mm	388 mm	55	Fine detail: vinyl and paper only, weed with care
1.28 × 3 in (32 × 76 mm)	1.1 mm	581 mm	24	Vinyl, card and thin sheet
1.7 × 4 in (43 × 102 mm)	1.4 mm	775 mm	12	Vinyl, card and thin sheet
2.56 × 6 in (65 × 152 mm)	2.1 mm	1,163 mm	4	Vinyl, card and thin sheet
3.41 × 8 in (87 × 203 mm)	2.8 mm	1,550 mm	3	Vinyl, card and thin sheet
5.11 × 12 in (130 × 305 mm)	4.3 mm	2,326 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More llama SVG files

← Llama with a flower crown All 12 llamas Cute llama with a blanket →