Alpaca, the fluffy cousin of the llama SVG
An alpaca in profile: fluffier than the llama, with a shorter, thicker neck, a mop of wool on its head and a rounder body. For yarn shop signs and knitting bags.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 90 × 100 mm (3.56 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 3: 1 outer edge and 2 cut-outs |
| Cut length | 515 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 180 curve and line segments |
Measured from the file. PNG: 1,813 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.9 × 1 in (23 × 25 mm) | Over 1.5 mm | 131 mm | 110 | Vinyl, card and thin sheet |
| 1.81 × 2 in (46 × 51 mm) | Over 3 mm | 262 mm | 30 | Any material, including 3 mm wood and acrylic |
| 2.71 × 3 in (69 × 76 mm) | Over 4.6 mm | 392 mm | 12 | Any material, including 3 mm wood and acrylic |
| 3.61 × 4 in (92 × 102 mm) | Over 6.1 mm | 523 mm | 6 | Any material, including 3 mm wood and acrylic |
| 5.42 × 6 in (138 × 152 mm) | Over 9.1 mm | 785 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.22 × 8 in (183 × 203 mm) | Over 12 mm | 1,046 mm | 1 | Any material, including 3 mm wood and acrylic |
| 10.84 × 12 in (275 × 305 mm) | Over 18 mm | 1,570 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.