Free llama SVG

Llama face SVG

Llama face, as a solid black shape — Llama face. The preview is the SVG file itself.

A llama looking straight at you with wide eyes: a fluffy cap of wool, two tall ears with the insides cut out, and a long nose with a split lip. One piece.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	61 × 100 mm (2.4 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	6: 1 outer edge and 5 cut-outs
Cut length	585 mm at this size
Narrowest part	2.4 mm at this size
Nodes	166 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,248 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.61 × 1 in (15 × 25 mm)	0.61 mm	149 mm	150	Fine detail: vinyl and paper only, weed with care
1.22 × 2 in (31 × 51 mm)	1.2 mm	297 mm	40	Vinyl, card and thin sheet
1.83 × 3 in (46 × 76 mm)	1.8 mm	446 mm	18	Vinyl, card and thin sheet
2.44 × 4 in (62 × 102 mm)	2.4 mm	594 mm	8	Vinyl, card and thin sheet
3.65 × 6 in (93 × 152 mm)	3.7 mm	892 mm	3	Any material, including 3 mm wood and acrylic
4.87 × 8 in (124 × 203 mm)	4.9 mm	1,189 mm	2	Any material, including 3 mm wood and acrylic
7.31 × 12 in (186 × 305 mm)	7.3 mm	1,783 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More llama SVG files

← Llama silhouette All 12 llamas Llama head and neck →