Free llama SVG

Baby llama SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Baby llama, as a solid black shape
Baby llama. The preview is the SVG file itself.

A cria: the same fleece on shorter legs with a shorter neck, so the head looks big and the whole animal rounder. For baby showers and nursery walls.

This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.

What is in the file

Size95 × 100 mm (3.74 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length491 mm at this size
Narrowest part2.5 mm at this size
Nodes188 curve and line segments

Measured from the file. PNG: 1,904 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.95 × 1 in (24 × 25 mm)0.64 mm125 mm100Fine detail: vinyl and paper only, weed with care
1.9 × 2 in (48 × 51 mm)1.3 mm249 mm25Vinyl, card and thin sheet
2.85 × 3 in (72 × 76 mm)1.9 mm374 mm12Vinyl, card and thin sheet
3.8 × 4 in (97 × 102 mm)2.5 mm499 mm6Vinyl, card and thin sheet
5.7 × 6 in (145 × 152 mm)3.8 mm748 mm2Any material, including 3 mm wood and acrylic
7.6 × 8 in (193 × 203 mm)5.1 mm998 mm1Any material, including 3 mm wood and acrylic
11.4 × 12 in (290 × 305 mm)7.6 mm1,497 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More llama SVG files

← Cute llama with a blanket All 12 llamas Llamacorn →