Free llama SVG

Llama in a heart SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Llama in a heart, as a solid black shape
Llama in a heart. The preview is the SVG file itself.

The sleepy llama framed in a heart, its ears reaching up into the lobes and its woolly neck filling the point. For Valentine cards and gifts for llama lovers.

What is in the file

Size100 × 89 mm (3.94 × 3.51 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length980 mm at this size
Narrowest part1 mm at this size
Nodes336 curve and line segments
SymmetryMirror
Also found asLlama Valentine SVG

Measured from the file. PNG: 2,000 × 1,790 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.89 in (25 × 23 mm)0.25 mm249 mm110Too fine for most machines
2 × 1.78 in (51 × 45 mm)0.51 mm498 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.67 in (76 × 68 mm)0.76 mm747 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.56 in (102 × 91 mm)1 mm996 mm6Vinyl, card and thin sheet
6 × 5.35 in (152 × 136 mm)1.5 mm1,494 mm2Vinyl, card and thin sheet
8 × 7.13 in (203 × 181 mm)2 mm1,991 mm1Vinyl, card and thin sheet
12 × 10.69 in (305 × 272 mm)3 mm2,987 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More llama SVG files

← Alpaca, the fluffy cousin of the llama All 12 llamas Llama outline →