Llama outline SVG
The standing llama drawn as one even line about 2 mm wide in a closed loop, scallops, ears and all. For colouring pages, foil, engraving and pen plotters.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 78 × 100 mm (3.06 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 912 mm at this size |
| Narrowest part | 2.3 mm at this size |
| Nodes | 364 curve and line segments |
Measured from the file. PNG: 1,569 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.78 × 1 in (20 × 25 mm) | 0.58 mm | 232 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 1.55 × 2 in (39 × 51 mm) | 1.2 mm | 463 mm | 30 | Vinyl, card and thin sheet |
| 2.33 × 3 in (59 × 76 mm) | 1.8 mm | 695 mm | 12 | Vinyl, card and thin sheet |
| 3.1 × 4 in (79 × 102 mm) | 2.3 mm | 927 mm | 6 | Vinyl, card and thin sheet |
| 4.66 × 6 in (118 × 152 mm) | 3.5 mm | 1,390 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.21 × 8 in (158 × 203 mm) | 4.7 mm | 1,853 mm | 1 | Any material, including 3 mm wood and acrylic |
| 9.31 × 12 in (237 × 305 mm) | 7 mm | 2,780 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Llama silhouette 
Llama face 
Llama head and neck 
Llama with a flower crown 
Llama with a scarf 
Cute llama with a blanket 
Baby llama 
Llamacorn 