Free llama SVG

Llama with a flower crown SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Llama with a flower crown, as a solid black shape
Llama with a flower crown. The preview is the SVG file itself.

The sleepy llama with three flowers across its brow between the ears. Each flower has an open centre, and a slit marks where the petals lie over the wool.

What is in the file

Size52 × 100 mm (2.05 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut14: 1 outer edge and 13 cut-outs
Cut length820 mm at this size
Narrowest part1 mm at this size
Nodes377 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,077 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.52 × 1 in (13 × 25 mm)0.25 mm208 mm160Too fine for most machines
1.04 × 2 in (26 × 51 mm)0.51 mm417 mm45Fine detail: vinyl and paper only, weed with care
1.56 × 3 in (40 × 76 mm)0.76 mm625 mm18Fine detail: vinyl and paper only, weed with care
2.08 × 4 in (53 × 102 mm)1 mm833 mm10Vinyl, card and thin sheet
3.12 × 6 in (79 × 152 mm)1.5 mm1,250 mm3Vinyl, card and thin sheet
4.16 × 8 in (106 × 203 mm)2 mm1,666 mm2Vinyl, card and thin sheet
6.24 × 12 in (158 × 305 mm)3 mm2,499 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More llama SVG files

← Llama head and neck All 12 llamas Llama with a scarf →