Free llama SVG

Mama llama and baby SVG

Mama llama and baby, as a solid black shape
Mama llama and baby. The preview is the SVG file itself.

A llama with her cria standing in front of her, both in profile. Their fleeces overlap, so the two llamas cut as one piece.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size97 × 100 mm (3.83 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length675 mm at this size
Narrowest part3.8 mm at this size
Nodes337 curve and line segments

Measured from the file. PNG: 1,948 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.97 × 1 in (25 × 25 mm)0.97 mm171 mm100Fine detail: vinyl and paper only, weed with care
1.95 × 2 in (49 × 51 mm)1.9 mm343 mm25Vinyl, card and thin sheet
2.92 × 3 in (74 × 76 mm)2.9 mm514 mm9Vinyl, card and thin sheet
3.89 × 4 in (99 × 102 mm)3.9 mm686 mm4Any material, including 3 mm wood and acrylic
5.84 × 6 in (148 × 152 mm)5.8 mm1,029 mm2Any material, including 3 mm wood and acrylic
7.78 × 8 in (198 × 203 mm)7.7 mm1,372 mm1Any material, including 3 mm wood and acrylic
11.68 × 12 in (297 × 305 mm)12 mm2,057 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More llama SVG files

← Llamacorn All 12 llamas Alpaca, the fluffy cousin of the llama →