Free llama SVG

Llama head and neck SVG

Llama head and neck, as a solid black shape — Llama head and neck. The preview is the SVG file itself.

A sleepy llama from the front, with long lashes, a split lip and a thick woolly neck below. The neck is cut off straight, so it sits on a line of text or the edge of a card.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	46 × 100 mm (1.8 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	8: 1 outer edge and 7 cut-outs
Cut length	608 mm at this size
Narrowest part	3 mm at this size
Nodes	230 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 954 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.46 × 1 in (12 × 25 mm)	0.76 mm	154 mm	180	Fine detail: vinyl and paper only, weed with care
0.91 × 2 in (23 × 51 mm)	1.5 mm	309 mm	50	Vinyl, card and thin sheet
1.37 × 3 in (35 × 76 mm)	2.3 mm	463 mm	21	Vinyl, card and thin sheet
1.82 × 4 in (46 × 102 mm)	3 mm	618 mm	12	Any material, including 3 mm wood and acrylic
2.74 × 6 in (69 × 152 mm)	4.6 mm	927 mm	4	Any material, including 3 mm wood and acrylic
3.65 × 8 in (93 × 203 mm)	6.1 mm	1,235 mm	3	Any material, including 3 mm wood and acrylic
5.47 × 12 in (139 × 305 mm)	9.1 mm	1,853 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More llama SVG files

← Llama face All 12 llamas Llama with a flower crown →