Free kangaroo SVG

Origami kangaroo SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Origami kangaroo, as a solid black shape
Origami kangaroo. The preview is the SVG file itself.

A kangaroo as if folded from one sheet of paper: straight edges, sharp corners and nine fold lines that run from corner to corner, cut as slits that stop short of the outline. A crisp modern take for cards and wall art.

What is in the file

Size100 × 93 mm (3.94 × 3.64 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length767 mm at this size
Narrowest part1.1 mm at this size
Nodes131 curve and line segments

Measured from the file. PNG: 2,000 × 1,856 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.93 in (25 × 23 mm)0.28 mm195 mm100Too fine for most machines
2 × 1.85 in (51 × 47 mm)0.56 mm390 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.77 in (76 × 70 mm)0.84 mm584 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.7 in (102 × 94 mm)1.1 mm779 mm6Vinyl, card and thin sheet
6 × 5.55 in (152 × 141 mm)1.7 mm1,169 mm2Vinyl, card and thin sheet
8 × 7.4 in (203 × 188 mm)2.2 mm1,559 mm1Vinyl, card and thin sheet
12 × 11.1 in (305 × 282 mm)3.4 mm2,338 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More kangaroo SVG files

← Kangaroo crossing sign All 12 kangaroos Mandala kangaroo →