Free kangaroo SVG

Kangaroo silhouette SVG

Kangaroo silhouette, as a solid black shape
Kangaroo silhouette. The preview is the SVG file itself.

The upright kangaroo as a solid shape, facing right, with its long foot and the end of its tail resting on one level line. No inside cuts, for shadow boxes, stencils and small decals.

Free for personal and commercial use, no sign-up. What you can do with it.

This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.

What is in the file

Size100 × 98 mm (3.94 × 3.87 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut1 outline
Cut length419 mm at this size
Narrowest part4.9 mm at this size
Nodes161 curve and line segments

Measured from the file. PNG: 2,000 × 1,969 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.98 in (25 × 25 mm)1.2 mm106 mm100Vinyl, card and thin sheet
2 × 1.97 in (51 × 50 mm)2.5 mm213 mm25Vinyl, card and thin sheet
3 × 2.95 in (76 × 75 mm)3.7 mm319 mm9Any material, including 3 mm wood and acrylic
4 × 3.94 in (102 × 100 mm)5 mm426 mm4Any material, including 3 mm wood and acrylic
6 × 5.9 in (152 × 150 mm)7.5 mm639 mm1Any material, including 3 mm wood and acrylic
8 × 7.87 in (203 × 200 mm)10 mm851 mm1Any material, including 3 mm wood and acrylic
12 × 11.81 in (305 × 300 mm)15 mm1,277 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More kangaroo SVG files

← Kangaroo standing upright All 12 kangaroos Hopping kangaroo →