Free kangaroo SVG

Kangaroo head from the side SVG

Kangaroo head from the side, as a solid black shape
Kangaroo head from the side. The preview is the SVG file itself.

The head and neck of a kangaroo in profile: a long soft muzzle, a dark eye, a nostril and two tall ears with their hollows cut out, ending square at the shoulder. For plaques and badges.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size78 × 100 mm (3.07 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length562 mm at this size
Narrowest part5.6 mm at this size
Nodes146 curve and line segments

Measured from the file. PNG: 1,575 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.78 × 1 in (20 × 25 mm)1.4 mm143 mm120Vinyl, card and thin sheet
1.56 × 2 in (40 × 51 mm)2.8 mm285 mm30Vinyl, card and thin sheet
2.34 × 3 in (59 × 76 mm)4.3 mm428 mm12Any material, including 3 mm wood and acrylic
3.12 × 4 in (79 × 102 mm)5.7 mm571 mm6Any material, including 3 mm wood and acrylic
4.67 × 6 in (119 × 152 mm)8.5 mm856 mm2Any material, including 3 mm wood and acrylic
6.23 × 8 in (158 × 203 mm)11 mm1,142 mm1Any material, including 3 mm wood and acrylic
9.35 × 12 in (237 × 305 mm)17 mm1,713 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More kangaroo SVG files

← Mandala kangaroo All 12 kangaroos Kangaroo in the outback →