Free kangaroo SVG

Kangaroo outline SVG

Kangaroo outline, drawn as a line
Kangaroo outline. The preview is the SVG file itself.

The upright kangaroo as one even line, with the curve of the haunch drawn in from the belly and a solid eye joined to the brow. For colouring pages, foil, engraving and pen plotters.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 98 mm (3.94 × 3.87 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length860 mm at this size
Narrowest part2.1 mm at this size
Nodes348 curve and line segments

Measured from the file. PNG: 2,000 × 1,969 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.98 in (25 × 25 mm)0.53 mm218 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.97 in (51 × 50 mm)1.1 mm437 mm25Vinyl, card and thin sheet
3 × 2.95 in (76 × 75 mm)1.6 mm655 mm9Vinyl, card and thin sheet
4 × 3.94 in (102 × 100 mm)2.1 mm874 mm4Vinyl, card and thin sheet
6 × 5.9 in (152 × 150 mm)3.2 mm1,311 mm1Any material, including 3 mm wood and acrylic
8 × 7.87 in (203 × 200 mm)4.3 mm1,748 mm1Any material, including 3 mm wood and acrylic
12 × 11.81 in (305 × 300 mm)6.4 mm2,621 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More kangaroo SVG files

← Kangaroo in the outback All 12 kangaroos Layered kangaroo with a setting sun →