Free kangaroo SVG

Hopping kangaroo SVG

Hopping kangaroo, as a solid black shape — Hopping kangaroo. The preview is the SVG file itself.

A kangaroo in the middle of a hop: body tipped forward, arms tucked, legs trailing and the tail held straight out behind as a counterweight. The pose from the outback road sign.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 72 mm (3.94 × 2.83 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	412 mm at this size
Narrowest part	2 mm at this size
Nodes	161 curve and line segments

Measured from the file. PNG: 2,000 × 1,460 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.72 in (25 × 18 mm)	0.51 mm	105 mm	130	Fine detail: vinyl and paper only, weed with care
2 × 1.44 in (51 × 37 mm)	1 mm	209 mm	35	Vinyl, card and thin sheet
3 × 2.16 in (76 × 55 mm)	1.5 mm	314 mm	15	Vinyl, card and thin sheet
4 × 2.88 in (102 × 73 mm)	2 mm	419 mm	6	Vinyl, card and thin sheet
6 × 4.31 in (152 × 110 mm)	3 mm	628 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.75 in (203 × 146 mm)	4.1 mm	837 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.63 in (305 × 219 mm)	6.1 mm	1,256 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More kangaroo SVG files

← Kangaroo silhouette All 12 kangaroos Kangaroo with a joey in her pouch →