Free kangaroo SVG

Mandala kangaroo SVG

Mandala kangaroo, as a solid black shape — Mandala kangaroo. The preview is the SVG file itself.

The upright kangaroo with a flower of eight petals cut into its haunch inside a ring of dots, drops up its back and down its tail. Cut it at full size and weed from the middle of the flower.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 98 mm (3.94 × 3.87 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	31: 1 outer edge and 30 cut-outs
Cut length	743 mm at this size
Narrowest part	1.5 mm at this size
Nodes	315 curve and line segments

Measured from the file. PNG: 2,000 × 1,969 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.98 in (25 × 25 mm)	0.38 mm	189 mm	100	Too fine for most machines
2 × 1.97 in (51 × 50 mm)	0.76 mm	377 mm	25	Fine detail: vinyl and paper only, weed with care
3 × 2.95 in (76 × 75 mm)	1.1 mm	566 mm	9	Vinyl, card and thin sheet
4 × 3.94 in (102 × 100 mm)	1.5 mm	755 mm	4	Vinyl, card and thin sheet
6 × 5.9 in (152 × 150 mm)	2.3 mm	1,132 mm	1	Vinyl, card and thin sheet
8 × 7.87 in (203 × 200 mm)	3 mm	1,510 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.81 in (305 × 300 mm)	4.6 mm	2,265 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More kangaroo SVG files

← Origami kangaroo All 12 kangaroos Kangaroo head from the side →