Free kangaroo SVG

Layered kangaroo with a setting sun SVG

Layered kangaroo with a setting sun, in layered colours
Layered kangaroo with a setting sun. The preview is the SVG file itself.

Four layers to stack: an orange sun, a red-brown hopping kangaroo, a paler chest and belly, and a dark eye, ear and toe tips. This one hops to the right.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 72 mm (3.94 × 2.83 in), scales to any size
Pieces9 separate pieces
Outlines to cut9 outlines
Cut length740 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes235 curve and line segments
Layers4: sun, kangaroo, chest and belly and eye, ear and tips

Measured from the file. PNG: 2,000 × 1,460 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.72 in (25 × 18 mm)Over 1.5 mm188 mm130Vinyl, card and thin sheet
2 × 1.44 in (51 × 37 mm)Over 3 mm376 mm35Any material, including 3 mm wood and acrylic
3 × 2.16 in (76 × 55 mm)Over 4.6 mm564 mm15Any material, including 3 mm wood and acrylic
4 × 2.88 in (102 × 73 mm)Over 6.1 mm752 mm6Any material, including 3 mm wood and acrylic
6 × 4.31 in (152 × 110 mm)Over 9.1 mm1,128 mm2Any material, including 3 mm wood and acrylic
8 × 5.75 in (203 × 146 mm)Over 12 mm1,504 mm2Any material, including 3 mm wood and acrylic
12 × 8.63 in (305 × 219 mm)Over 18 mm2,256 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More kangaroo SVG files

← Kangaroo outline All 12 kangaroos Kangaroo standing upright →