Free kangaroo SVG

Kangaroo crossing sign SVG

Kangaroo crossing sign, as a solid black shape — Kangaroo crossing sign. The preview is the SVG file itself.

The diamond warning sign from Australian roads: a hopping kangaroo inside a square frame stood on its corner. Its tail and trailing foot reach the frame, so it cuts as one piece. Cut it from black and lay it on yellow.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	764 mm at this size
Narrowest part	2.8 mm at this size
Nodes	149 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 1 in (25 × 25 mm)	0.71 mm	194 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)	1.4 mm	388 mm	25	Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)	2.1 mm	582 mm	9	Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)	2.8 mm	776 mm	4	Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)	4.3 mm	1,164 mm	1	Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)	5.7 mm	1,552 mm	1	Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)	8.5 mm	2,329 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More kangaroo SVG files

← Cute baby kangaroo All 12 kangaroos Origami kangaroo →